29th Infantry Division TS3 server information:
- Hostname: twentyninth.ts.nfoservers.com
- IP: 220.127.116.11
- Port: 35750
- Password: 29th
- As of April 14th, 2013 recruits, generally discharged members, public players and members of other units are allowed access to our Teamspeak but are restricted to the public channels only.
Be sure to read the Rules of the Teamspeak Server
|ATTENTION: Public players must remain within the public area, and may not be dragged into the other 29th Channels.|
The following tutorial is a definitive guide for everything you need to know about TeamSpeak 3 (TS3).
TeamSpeak 3 Tutorial
Installing TeamSpeak 3
- In this part of the manual we are covering the TS3 client-side setup. If you are interested in setting up your own server, download the TS3 server, and then watch this: [http://www.teamspeak.com/? page=tutorials\&type=server]. For any questions or issues about setting up a server, please consult the TS3 forums; you will find the members to be very friendly and supportive.
- Click on the “download TS” link at the top. You will see a number of
downloads to choose from: download the client that is compatible
with your Operating System (OS), i.e. download the Windows 7 64-bit
client if you are running Windows 7*. Agree to the User License
Agreement and click “submit”. Wait for the download to finish.
- *If you are unsure of what OS you are using, go to Start, right click on computer/my computer, click properties, and you will find your OS type at the top of the properties box.
- Open up the TS3 Client. Go through the installation guide and click “install”. Give it a moment to install the files. Once this is done, close the installation setup, and open up the TeamSpeak 3 Client. If you’ve created a desktop icon, double click on this, if not, go to Start and search for “TeamSpeak 3 Client”.
- When it opens, a box may appear saying “Welcome to TeamSpeak”. If no box appears, go to the toolbar at the top and click Settings, then Setup Wizard. Go through the setup guide.
- Please be aware: Your rank (Pvt., PFC, Cpl. etc) will show up automatically when you are on the 29th TS server.
- If you find your microphone doesn’t work during the test, make sure it is properly plugged in to your computer, and in the correct port. Check you haven’t physically muted it. If you have further troubles, visit the TS3 forums (linked above).
- You will get an option to enable plugins. An important plugin is the TS3 overlay, as you can see which members of your squad are talking. This helps in getting to know your squad better, and if members from other squads are in the server, you’ll know who is speaking. If you choose to install this plugin, you can enable/disable it at any time by going to settings > plugins > DirectX overlay plugin. A comparison between this overlay and TSNotifer can be found in TS3 overlay comparison section
- Just before the setup stage is over, you will be prompted to rent a TS server and to open up a list of public servers. If you wish to rent a server, tick this box. Deselect the public server list box, as the server details for the 29th are at the top of this page.
Connecting to the 29th Server
Information for connecting to the 29th server are at the top of the page. To connect to the 29th server, go onto connections, connect, and enter the server details in the appropriate boxes. When entering the server address, put the port number on the end, like so: twentyninth.ts.nfoservers.com:35750. If you don’t put :35750 at the end of the address, you will not be able to join the server.
Create a bookmark for the 29th Server
Creating a bookmark ensures you always have quick access to the servers you want and allows you to avoid having to repetitively type in server details.
- Start Teamspeak and click on the Bookmarks tab.
- Select Add to
Bookmarks from the drop down menu.
- Label: Name of bookmarked server. i.e. 29th Infantry Division
Address: Host name or plain IP and port. i.e 18.104.22.168:35750
Nickname: Your selected surname (last name). Do not add anything but your surname.
Server Password: 29th
- Label: Name of bookmarked server. i.e. 29th Infantry Division
- Click Apply
- Click Ok
Finding your Squad’s Channel
The 29th server is split up into many different channels. Public Channels are at the top then Able, Baker, and Charlie Company, Staff Offices and an Idle channel. For each company, there are 2 or 3 platoons; you will find your squad’s channel in your platoon’s section. For example; if you are in Able Company, First platoon, Third squad (AP1S3); first you find Able Company, then AP1, and then double click on AP1S3 to join.
Set your Squad Channel as your Default Channel
- Start up teamspeak and connect to the 29th server.
- Join the channel you want to default to when ever you start
- This will likely be your squad channel.
- Go into bookmarks, right and click Manage Bookmarks.
- Find the Default Channel field.
- Click checkmark button next to it
- Now, click the Apply button.
Now when ever you join the server through your bookmark you will join that channel by default
Congratulations! You now have a fully functioning TS3 client, and you can communicate with your squad during drills and after drills.
Settings and options
|NOTE: The following sections are not crucial to using Teamspeak, but if you wish to learn more about the different options and functions available, or you are having technical difficulties of any kind, read on.|
This section covers the options in the tool bar at the top of your TS3 client.
In the connections tab, you can type the address of a server to connect to, disconnect from the current server or all servers, bring up a server list or quit TS3.
Note: it is possible to connect to more than one server at the same time. To do this, go to Bookmarks, right click on the server you wish to join, and select “Connect in new tab”.
The bookmarks tab lets you create and manage bookmarks for servers, allowing you to access them quickly. You can choose your nickname for each individual server here. Note: do not put your rank in front of your name, as this will show up automatically when you join the 29th server.
The capture, playback, and hotkey profiles are all set to default; these can be changed in the settings tab. It is important to leave these on default so you can speak and hear others speaking. You can also state your current status as “away”, mute your microphone, and mute the speakers & headphones. Further down, you can change your nickname to your choice, and set your phonetic nickname, which lets others hear how to pronounce your name. When setting an avatar, it must be within 300*300 pixels. The last option is connection info; important information about your status and bandwidth are here.
- If you find that your avatar does not appear after setting it, delete the “Avatar” file in Users/USERNAME/AppData/Local/Temp.
Only applies to admins.
This section will cover important tools.
- Contacts: To add a user to the contact list, drag the user’s name into the contact box. You can decide if you want to be friends with this person or neutral, or you can block them. You can allow this user to whisper with you, you can block the user, and choose how you wish to view them in the channel. More on the whisper function is in the Settings section.
- Client log: If you are experiencing troubleshooting difficulties, copy this client log, make a thread in the 29th forums Medical office: http://forums.29th.org/categories/medical-office, and the TS3 troubleshooting section: http://forum.teamspeak.com/forumdisplay.php/99-Client-Support, and paste the log in the thread.
- Start/stop recording: If you wish to record the activity in your channel, click on Start recording. Save the file somewhere you won’t lose it. When you are finished recording, click on “Stop Recording”. A shortcut for this is ctrl+shift+T. To access the file you recorded to, go to the place you saved it.
- Setup Wizard: run this to quickly configure your settings.
- Identities: opens up the Identity Manager. Your identity is set to default, but you can create new identities. Your identity is important because the servers you join will keep a track of your login information and permissions. Once the server has your identity, you no longer need to enter your username and password every time you join.
If you are planning on changing PCs, you can export your identity to a .ini file and then import it to your target destination. To do this, go to Settings > Identities and choose the identity you want to export. Click Export on the upper right, then choose a filename. On the target PC you wish to import to, start up TS3, go to Settings > Identities, and choose Import then point to the .ini file to complete the import process. This will allow you to receive the same permissions settings assigned to you by the server regardless of which PC you’re using.
- Plugins: select which plugins you wish to run.
- Application: lets you change what language you here notifications in, choose which toolbars you want to view, view your ping and identity, and manage subscriptions.
- Design: lets you customise TeamSpeaks appearance.
- Downloads: choose where to download to, and lets you put a limit on bandwidth when uploading/downloading.
- Security: the server can remember your password and you can set up a master password. You can also open up your Identity Manager from here.
- Playback: change the volume of TeamSpeak and test the playback sound.
- Capture: here you can set up how you want your microphone to be activated, fine-tune your microphone and test the output. The test is a good indicator of what others will hear when you speak.
- Chat: you can choose how far back you want text chat to be remembered, log chat history, and choose how many lines of text chat you wish to reload when starting up TS3.
- Whisper: choose whether individual settings are used and if users are allowed/denied to use the whisper function with you, or deny all users.
- Hotkeys: custom hotkeys for commands can be set here. To set up a whisper key, click the right “add” button, show advanced options, scroll down to whisper, open it up and click on “Activate Push-To-Reply to a Whisper”. Then, click on “No Hotkey Assigned”, choose a key that you won’t accidentally hit, and click “OK”. Whisper lets you talk with individual users in your contacts list. The reply to a whisper key lets you talk with the user who is whispering with you.
- Messages: lets you leave a message when you are disconnecting.
- Notifications: If you wish to mute a notification sound (such as “User has joined your channel”) you can uncheck the box for the relevant sound here.
- In Teamspeak, log on to the 29th server, and click on Settings > Options (or just the Alt-P shortcut).
- In the Options dialogue, click on Whisper Lists. You should see a blank box if you haven’t previously created a whisper list.
- Click on ‘New’ and assign a key. This is the key you will be using to whisper, so make sure it isn’t binded to your current PTT key, and that you won’t accidentally press it.
- To target a client or channel, click on 29th Infantry Division drop-down arrow on the right-hand side panel. To choose a client(s) to whisper to, double click on the user you wish to communicate with, and double click on his name OR drop him into the middle box. The same applies for any channel you wish to whisper too. Note: everybody in this channel will hear you.
- When you have finished, click ‘Apply’ then ‘Ok’.
Your whisper list has now been set up. When you press your whisper key, only the people in the whisper list will hear you.
The Whisper lists enables the client to talk with specific individuals who are in the whisper group. A Platoon or Company leader can communicate with several different squads in separate channels, as long as they have been included in the list. The applications of this include (but are not limited to): Leaders communicating with several different channels at once. This allows better quality communication than Darkest Hour VOIP provides. Individual squad leaders can separate their squads into their own sub-channels, allowing them to function as independent ‘Fire-teams’, while still being able to communicate with the other teams in the squad. Fire-teams using Whisper is currently in it’s infancy in the 29th ID.
The Teamspeak webpage, support forums and tutorials are found here. You can also rent your own TS server, view your client changelog (which also tells you which version of TS3 you are running), check for updates and view the TS copyrights. Teamspeak 3 will update automatically, but it doesn’t hurt to check for updates about once every month.
TS3 overlay comparison
Inbuilt TS Overlay
- Easy to install.
- Once enabled, it will always start up when TS3 is running (if Notifier is enabled).
- Overlay can be moved around with the scroll-lock key
- In some games with anti-cheating enabled, i.e. Punkbuster, you may be kicked.
- Unable to scroll down when a large number of people are in the server.
- Large number of people can be seen onscreen.
- There is a tray icon in Windows task bar for easy customisation.
- The overlay can be moved to various points on-screen, i.e. middle-left, centre, top-right etc.
- Works for TS2 and TS3.
- Does not start up automatically with TS3.
- If you start or exit TSNotifier while in a game, the game will crash. NB: you can still exit TS3 without crashing.
- Other applications that use direct3D such as x-fire and Fraps may cause problems when the notifier is enabled.
- Will not work if TS2 and TS3 are ran simultaneously.
Download TSNotifier from the link above.
Using the installer: go through the installation guide. Install the notifier somewhere you can easily find.
Using the zip file: open using Winzip, or any other file compression program. Go to your desktop and create a new folder called TSNotifier. Move all the TS3HelperPlugin folder and all the files into the TSNotifier folder.
The next instructions for running TSNotifer are quite long, but they are clear. Once done, you can run TSNotifier at any time.
Before running the notifier, make sure the inbuilt notifier is turned off. Open up TS3, go to Settings > Plugins and uncheck the box called DirectX overlay plugin. Not doing this may result in a conflict between the plugins, and the game application crashing. Close TS3 then follow the next steps.
To run the notifier, double click on TSNotifier.exe. NB: if you use the notifier often, it is useful to move the .exe to your desktop, or to pin it to the taskbar. If you have a firewall running such as Comodo, it will prompt you if you want to allow this program to run; allow for all messages.
thumb |alt=Example alt text|Check Darkest Hour will run the notifier by enabling it in the gamesettings.ini. Before starting up Darkest Hour, or any other game, check the notifier will run with Darkest Hour. This is done by going to the task tray at the bottom right, clicking the arrow, right clicking clicking on TSNotifier, and selecting Edit gamesettings.ini. Search for RedOrchestra.exe. If you are using notepad, hold ctrl+f to open the search box, and enter the text there. Underneath RedOrchestra.exe it must say game.enabled=1 to work for Darkest Hour. It will also work for RO1 and Mare Nostrum.
When your happy with the settings, close down the notifier. Then, restart TS3 and the notifier. When playing any game with the notifier enabled, don’t start up/close the notfier while the game is running, as it will crash. Note: if the notifier doesn’t start when running Darkest Hour, close both TS3 and the notifier, and then restart them in any order. Join the 29th server, and then start DH. If you see TSNotifier enabled (DX9), and Lobby somewhere on the screen, the notifier is working.
If the notifier isn’t working, go to Settings > Plugins, and tick the box TSNotifier Helper Plugin.
From the gamesettings.ini folder shown above, you can choose which games you want to run the notifier. You can also go to Format > Font to change the font type, style, and the size of the text on screen.
To choose where you want the notifier to be on-screen, right click TSNotifier in the task tray, scroll over Speaker - Position and choose where you want it to go.
To backup your TeamSpeak 3 client, go to your client folder located in:
Win7 /Vista: C:\Users\
WinXP: C:\Documents and
Alternatively, you can find the file by opening “Start” at the bottom left of your screen, and searching for “TS3Client” if you are using Windows.
Copy the files called
and paste them in any place of your choice, preferably somewhere safe and easy to find. If you uninstall TS3, or have reason to reinstall, your bookmarks and settings will still exist upon reinstall. If they don’t automatically reinstall (you know this has happened if you don’t have any bookmarks), simply move the 3 files in your backup folder into the new TS3Client folder, replacing the existing ones. Keeping these bookmarks can save you time if your contact information is lost.
If you encounter a techincal problem of any sort that isn’t discussed in this section, please search the 29th Medical Office 2. There is a 32bit and a 64 bit version of TS3. Before going any further, check you are running the correct version for your Operating System by. Do this by going to [Computer/System Properties (TAB ]. Scroll down, and next to ‘System Type’ and it will tell you what type your OS is.
If others on TS can’t here you, then your microphone may have been incorrectly set up on installation.
- Make sure you have a “capture profile” selected.
- If users cannot hear you in TeamSpeak, there may be a simple reason
for this. Check if you’re using the correct key to talk, make you
haven’t physically muted your microphone by sliding a switch, check
you haven’t muted your microphone on TeamSpeak or reduced the
capture volume, check you haven’t reduced/muted the volume of your
microphone through the volume icon in the task tray.
- In the TS settings, in playback and capture settings, set the default device to either your sound card (if that is what you plug into) and/or if that doesn’t work or if your SC isn’t listed, select the direct sound option.thumb |alt=Example alt text |An example of how to change microphone volume on Windows 7.
- Sometimes, when TeamSpeak is running in the background, push to talk no longer works. This is solved by running TeamSpeak as an admin. To do this, you must be logged onto your computer as an administrator. To run as admin: right click on TS3, and click “run as administrator”.
- If you are using a USB microphone and it is not working, try other USB ports.
- If your microphone still doesn’t work, update your sound card drivers.
If other users say your voice is too quiet or too loud, then you can change the volume of your microphone through the taskbar at the bottom of your screen. Look for an icon, usually on the right, that looks like a speaker. Right click on it, and look for something called “sounds” or “recording devices” etc. A list of available devices should appear. Right click on the device you are using, select properties, and from there you should find an option to adjust the volume of your microphone.
Should I use push to talk or voice activation?
Voice activation can sometimes pick up background sounds, such as music, doors opening and closing, or typing. This can be reduced by increasing the volume needed to activate the microphone, but your voice might not be picked up straight away.
If you prefer push to talk, make sure you select an easy key use to activate your microphone. The backward slash ‘\’ key is a possible choice. Alternatively you can use buttons on your mouse such as the 4th or 5th mouse buttons. Make sure it isn’t a key you often use when typing, otherwise your mic will come on intermittently, which is annoying for other people in the server.
Unable to hear other users speaking
Important: update your sound card drivers. If you still can’t hear sound, go to Help > Check for Update.
You may get a message saying ‘The configured playback device was not found’ when connecting to a TS server. If this is the case, go to Settings > Options > Playback and check you are not using another soundcard. You can also try updating your soundcard or reinstalling the driver version.
If you cannot hear any sound output through your headphones, try using speakers instead. There is an unsolved issue where certain headphones, especially ones using 5.1 surround sound, where the sound is directed to the speakers instead of the headphones. A work around for some users is to switch their speaker settings to “stereo”.
Unable to connect to server
- If the “Enter server password” box keeps coming up, and you are sure the password is correct, check you have typed out the full server address: twentyninth.ts.nfoservers.com:35750. If you are still unable to connect, check that TS3 isn’t being blocked by your firewall.
- Open up Command Prompt (go to Start, click on the search bar and type ‘cmd’). Input ‘ipconfig /flushdns’ and press enter, then close the window. Open up Team Speak, then open a new tab in teamspeak (left click on bookmarks, right click on one and select ‘open bookmark in new tab’. Right click on the toolbar in the TS main screen and check tabs. Then, log in by using the normal details (provided in this wiki) on a separate tab.
- If you are being repeatedly logged off, and get the message “Failed to resolve hostname ‘keep-alive’” each time, go to Settings > Plugins > uncheck DirectX Overlay Plugin.